結晶罐Crystallization Tank

l 采用進口304或316L不銹鋼制作，內壁采用機械拋光或電解鏡面拋光，外壁采用304全焊接結構保溫，外表面采用鏡面或亞光處理。

l 結晶罐上安裝0.22um呼吸器。

l 能承受121℃高溫滅菌消毒，配備衛生級壓力表。

l 罐體對外連接口采用衛生快開接頭。

l 帶有溫度監控裝置，2個視鏡，清洗球及氮氣進口、溫度計口等接口。

l 軸的密封采用特殊的衛生級機械密封設計，確保物料不受污染。

l 可采用變頻調整裝置，攪拌軸轉速調節范圍大。

l The crystallization tank is made of imported 304 or 316L stainless steel, the inner wall is mechanically polished or electrolytic mirror polished, the outer wall is insulated with a 304 fully welded structure, and the outer surface is treated with mirror or matt finish.

l Install a 0.22um respirator on the crystallization tank.

l The crystallization tank can withstand high-temperature sterilization and disinfection at 121 ℃, and is equipped with a sanitary pressure gauge.

l The external connection port of the tank body adopts a sanitary quick opening joint.

l The crystallization tank is equipped with a temperature monitoring device, 2 mirrors, cleaning balls, nitrogen inlet, thermometer port, and other interfaces.

l The shaft seal adopts a special sanitary mechanical seal design to ensure that materials are not contaminated.

l The crystallization tank can adopt a frequency conversion adjustment device, with a wide adjustment range of mixing shaft rotation speed.